STS Super Bond is a specially formulated hybrid, radon-resistant polymer sealer and bonding material that works in damp or dry areas, never dries out and provides an air tight seal. STS Super Bond comes in a sealed foil tube that uses a standard caulk gun. Each tube is packaged in a 10.5 oz. cartridge and will provide a bead of 1/4” wide by approximately 25’ to 30’ long. The sealed tube prevents moisture from damaging the adhesive before you can use it. Once the pull tap on the bottom of the tube or the top dispensing hole of the tube is punctured, you must use the tube until finished or through out what you do not use, because it will not save for another day. STS Super Bond is used for seaming the liner to the foundation wall, creating the first seal in preventing water, moisture, radon gas, odors, dust mites and other unwanted pests, sealing liner to pipes, piers and other objects. STS Super Bond is not used in between seams in the liner. Use the Seam Lock Tape for this. Note: Use the 1/4" drill bit ( provided ) to gage the hole size needed when cutting the tip of the flow tube for the STS Super Bond. This is a good guide for the bead size needed of the STS Super Bond to be applied.